PDA

View Full Version : Fiery ic-408 2.0


Custom Search


jemsovic
03-07-2010, 06:04 PM
Please help I have problem when I install software 2.0 every print gets dump with error no supported finisher installed. but with 1.1 software I don't have any problems printing. Thanks in advance.

pepper38_cnd
03-08-2010, 02:17 AM
Stick with 1.1 if it ain't broke why fix it?

jemsovic
03-08-2010, 08:19 AM
Just wondered if there was some fixes or improvements in software, and would be nice to find release notes for 1.1a and 2.0 to see what if any are made.

pepper38_cnd
03-08-2010, 11:29 AM
Here are the IC408 V2 Realease Notes (http://myprintcontroler.bravehost.com/Fiery/IC408V2ReleaseNotes.pdf)

jemsovic
03-08-2010, 12:06 PM
Thank's, but it has nothing about new features or fixies in this pdf.

Albonline
03-08-2010, 01:45 PM
ver 2.0 supports vista x64 and changes driver interface . but the message that the finisher is incorrect? what finisher are you try ing to use? if the ru unit is attached the ic 408 constantly reboots.

jemsovic
03-09-2010, 08:34 AM
The finisher is fu-607, and I use windows 7 x64 with almost no problems on 1.1 version. Thank's for your replays at this matter.

Albonline
03-09-2010, 02:04 PM
theonly thing i can think that would do this is the wrong/bad system code load. maybe the incorrect driver?

jemsovic
03-09-2010, 09:13 PM
I downloaded it from km.eu ftp site from ic-408 folder and name is corect, I don't know what else could be. I am now on 1.1a version and working fine.

billak
03-15-2010, 10:24 PM
try to update firmware to latest 60.

jemsovic
03-16-2010, 01:45 AM
My service man already installed latest hi sad but i am not sure if it is 60 i will check

Custom Search