emujo
03-12-2010, 01:12 PM
C451 w/300K latest f/w. When customer runs large jobs on 11x17, we get a wrinkles in the lead edge 2nd side area only. No issues with 1 sided 11x17 or from what I can tell 2 sided on LT or LG. Brand new fuser, tried adjusting fuser speed down to -2 and loop values for trays and duplex with no change, aligning roller looks good. I can run 50 or so with no issues, but anything over that starts to show the creases, maybe every 5th or 6th copy. Ed