2nd side wrinkles on C451

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • emujo
    Field Supervisor
    2,500+ Posts
    • Jun 2009
    • 3009
    #1

    2nd side wrinkles on C451

    C451 w/300K latest f/w. When customer runs large jobs on 11x17, we get a wrinkles in the lead edge 2nd side area only. No issues with 1 sided 11x17 or from what I can tell 2 sided on LT or LG. Brand new fuser, tried adjusting fuser speed down to -2 and loop values for trays and duplex with no change, aligning roller looks good. I can run 50 or so with no issues, but anything over that starts to show the creases, maybe every 5th or 6th copy. Ed
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
    Tags: 11x17, 2nd, area, brand new, c45, c451, change, copy, customer, duplex, edge, fuser, good, jobs, lead, lead edge, roller, show, side, sided, speed, wrinkles
    • Mr Spock
      Vulcan Inventor of Death
      1,000+ Posts
      • Aug 2006
      • 2064
      #2
      Oh great emujo That almost sounds like a clutch going bad/slipping when hot.
      And Star Trek was just a tv show...yeah right!

        Comment

        Previous template Next
        Working...