mascan42
03-13-2010, 04:20 PM
I have a C250 without a finisher, that the paper isn't falling down into the exit tray properly. The paper isn't curling, and I've tried fresh paper. The trail edge just seems to get hung up on the black plastic just under the exit pinch rolls, until eventually a page sits so high up that the exit roll pulls it back up and everything lands out of order.
I noticed that some C250's have smooth plastic exit pinch rolls and some have them with a sandpaper-like texture. This machine has the textured ones, and I also received the textured ones when I ordered replacements.
Also, has anyone ever had the exit unit out of the machine? Because I can't for the life of me figure out how it comes out, since there are no visible screws anywhere.
I noticed that some C250's have smooth plastic exit pinch rolls and some have them with a sandpaper-like texture. This machine has the textured ones, and I also received the textured ones when I ordered replacements.
Also, has anyone ever had the exit unit out of the machine? Because I can't for the life of me figure out how it comes out, since there are no visible screws anywhere.