PDA

View Full Version : F 35 1 code on konika 7022


Custom Search


claude1957
03-16-2010, 02:59 AM
anybody know what to do with it ???


claude

Pinoy_Tech
03-16-2010, 05:52 AM
F35-1 pertains to Abnormal Low fixing temp TH1. Try to clean the thermistor and reset the code by entering mode 25, software switch 3-1, make it "zero". If the problem occur again, try to replace thermistor. Make sure that AC supply from mains is okay.

aidil rashidi
03-16-2010, 06:16 AM
Check also BOTH of the heater lamp for sign of broken filament or discoloration. this usually meant faulty lamp.

claude1957
03-16-2010, 09:36 PM
I am sory about that but I made a mistake It wasen't a F 35 1 code but a F 36 1 code sory again.

and thanks for your help

claude

Pinoy_Tech
03-17-2010, 05:43 AM
Did you solved already? It is the same fusing error code but overheat poblem and the resetting is the same procedure. Similar problem with Thermistor abnormalities.

claude1957
03-19-2010, 02:44 AM
Not yet I am trying to find the th1 in some place but no sucess yet. Trying to find the service book but no luck to but I let you know for sure

thanks again

claude

nxoxe
09-04-2010, 02:57 AM
No. Error code
(decimal number)
Classification KRDS
Main code Sub code
001 10-1 Communication error E0 00
002 10-2 01
003 — — 02
004 18-1 Paper feed tray error 03
005 18-2 04
006 18-3 05
007 18-4 06
008 26-1 L detection error 07
009 28-1 High voltage power
error
08
010 28-2 09
011 28-3 0A
012 34-1 High fixing temperature
abnormality
0B
013 34-2 0C
014 35-1 Low fixing temperature
abnormality
0D
015 35-2 0E
016 35-3 0F
017 35-4 10
018 35-5 11
019 35-6 Low fixing temperature
abnormality
E0 12
020 35-7 13
021 35-8 14
022 35-9 15
023 35-10 16
024 36-1 Fixing sensor error 17
025 36-2 18
026 36-3 19
027 — 1A

Custom Search