claude1957
03-17-2010, 12:34 AM
Any body know about it
tanks
claude
jotunn
03-17-2010, 12:27 PM
F36-1: TH1 (fixing temperature sensor 1) high temperature error. This error occurs if TH1 high temperature error signal is detected continuously for at least 1 second.
You can try to reset this error following this procedure:
Enter the "25" mode and set to "0" the bit 1 in DIP SW3.
If error occurs again, check or replace TH1.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.