View Full Version : Windows 7 driver for Di2510
aleksander
03-19-2010, 08:09 AM
Hi all,
Anyone have got PCL Printer driver Di2510 for Windows 7? or any other solution.
I will appreciate for any solution. Thank you.
jotunn
03-19-2010, 10:18 AM
There are drivers for Di2510 PCL in Windows 7 32bit. If you cannot see the printer in the list, try to obtain drivers from Windows Update.
fuckthesystem
03-19-2010, 11:35 AM
Hi there!
You can download and use the bizhub 250/350 Windows 7 drivers, the engine/controller and optionals are basically the same.(www.konicaminolta.us (http://www.konicaminolta.us))
For your additional information you can also use Windows Vista drivers for W7, for any engine.
I Hope this helps!
aleksander
03-22-2010, 04:00 AM
Thank you for the solutions.
aleksander
03-22-2010, 04:40 AM
Hi there!
You can download and use the bizhub 250/350 Windows 7 drivers, the engine/controller and optionals are basically the same.(www.konicaminolta.us (http://www.konicaminolta.us))
For your additional information you can also use Windows Vista drivers for W7, for any engine.
I Hope this helps!
Thanks, but I need the PCL driver, not PS. I haven't got PS optional for my Dialta. Of course for bizhub 350/250 include with Emperon. No problem fpr PCL and postscript. Different with Dialta.
Mr Spock
03-22-2010, 11:37 AM
Service & Support | Windows 7 Compatibility (http://kmbs.konicaminolta.us/content/support/windows7.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.