PDA

View Full Version : Ineo_Bizhub 751


Custom Search


Pinoy_Tech
03-21-2010, 08:12 AM
Hi to all,

Maybe you guys have an experienced about the mentioned model above. I just want to get a little information about the machine's performance. One of our customers wish to replace his old Aficio 1045 with Ineo 751. I believed, the customer already decided to buy one and very soon I'm going to install it.

His AF-1045 has only stapler problem anyway!

3783

Thanks,

ineo 751 - Develop (http://www.develop.de/en/products/0/86__produkte-detail.htm)

http://www.ov3.de/media/customers/4410/00854750001233308526.jpg

mrwho
03-21-2010, 01:00 PM
I really never had the chance to play with it, but I really hope they solved the developer/toner spilling problem that's plaguing these machines since their first generation (Konica 7155/7165).

/crosses fingers

bizhub1
03-21-2010, 03:27 PM
Hello, I only have 1 of these in the field, it has about 550k on it and I have done the 205k pms and it has ran flawlessly. No dv dumping what so ever so far.

TheOwl
03-22-2010, 12:19 AM
Definately a good machine. We have 12 of these (Konica Minolta version) out in the field with no real troubles at all.

Pinoy_Tech
03-22-2010, 06:48 AM
I was also worried about the previous models like K-7155 & 750 series that dropping some particles of developer on conveyance section that eventually damaging the hot roller. I'm anticipating that the caused of the said trouble is from lower portion of the magnetic roller. I noticed that there is a big gap between magnetic roller and lower frame that store some drops of toner on it and blocking the dveloper flow for quite sometime. The factory simply minimized it by adjusting the angle of magnetic height and maybe the latest firmware has to do something to reduce the toner density replenishment... Nice to hear the feedback for this 751 model. Thank you guys for partially easing my fears....

Custom Search