PDA

View Full Version : 1201/2001 jams on C250


Custom Search


emujo
03-23-2010, 09:34 PM
This thing's about to become an anchor..... Jams only from tray 2, LT or LT-R. might be able to get 5-10 sheets max prior to jam...
Replaced all feed rolls, shafts, clutches, sensors, tray 2 feed motors, OACB (w firmware update) and tray pwbs with no change.
Tried full range of loop adjustments to tray 2 with no change. Tray 1 and bypass feed fine. Any thoughts? Thanks, Emujo

mgutski
03-23-2010, 09:49 PM
just a thought, I have had a jamming issues that turned out to be a crack in the paper tray frame. replaced the tray and the jams stopped.

emujo
03-24-2010, 01:36 PM
Thanks for the tip..I have not looked at this yet. Emujo

Custom Search