View Full Version : error C-1116 BH500
tonycalamaro
03-23-2010, 10:45 PM
When i turn the copier on it gives me an "error c-1116".
could you help me please?
mrwho
03-23-2010, 11:09 PM
Here's a copy'n'paste from the manual:
FS-510
C-1116
Exit roller release motor (M6) drive abnormality.
• When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON.
• When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON.
Check:
Exit roller release motor (M6)
Shutter home sensor (PS16)
FS control board (FSCB)
Basically it's a finisher problem. Although, without examining, it's hard to tell for sure, but you've either got something broken or out-of-place on your finisher's exit.
JustManuals
03-24-2010, 03:28 AM
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals (http://www.justmanuals.com)
Paul@justmanuals.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.