PDA

View Full Version : reset konica minolta c360 image transfer belt


Custom Search


madu132
03-26-2010, 08:31 PM
Does anyone know how to reset image transfer belt for C360?

because the counter already pass the limit and now the machine cant be used.

thx

KEVIN900
03-26-2010, 11:34 PM
Hey madu, slide the transfer belt out of the copier 6-8 inches, and on the far right, towards the front of the belt unit, under the sep finger bracket, is a small black plastic holder. You'll know it by the teeny-tiny phillips screw. In that plastic holder is a small fuse ( GSB8/100 ). replace the fuse, re-assemble the belt unit. Good to go.

madu132
03-27-2010, 10:03 AM
Hey madu, slide the transfer belt out of the copier 6-8 inches, and on the far right, towards the front of the belt unit, under the sep finger bracket, is a small black plastic holder. You'll know it by the teeny-tiny phillips screw. In that plastic holder is a small fuse ( GSB8/100 ). replace the fuse, re-assemble the belt unit. Good to go.

hello kevin,
I still cant find the fuse location... can you give more information...
the fuse inside transfer belt isn't?

to make sure, we are talking about bizhub c360, yes?

thx

dallas
03-27-2010, 01:31 PM
It's very simple.

3832

madu132
03-27-2010, 02:11 PM
It's very simple.

3832

thank you dallas

I miss that information from the manual

nguyen2016
08-09-2016, 01:21 AM
It's very simple.

3832
Thank you so much! You saved my school printer & my life.

Custom Search