Knoica 7165 Paper size problem

[copyguy5]

After replacement of memory module and putting back in the original settings, APS (auto paper selections) only seems to recognize A4 & B5 European sizes, Software switch setting don’t seem to work. Any suggestions as to what I may be doing wrong?

Thanks for any assistance

copyguy5

[CMB]

you need to perform the ADF paper size adjustments. it is done in the 47 mode. can't remember the exact address though. look in the service manual for ADF paper size adjustment. real quick and simple.

[copyguy5]

Thanks for the info. I'll go back to the manuals.

Thanks again

copyguy5