View Full Version : minolta EP 3050
m_e_s_group
04-23-2007, 01:44 AM
plz help me in this problem
the copier gives me the symbol of maintenance .(the key )
Scott_Lewis
04-27-2007, 03:13 AM
plz help me in this problem
the copier gives me the symbol of maintenance .(the key )
Are you talking about the little wrench in the lower left corner of the LCD screen?
If so, touch the wrench. You will be taken to a screen with a list of fail codes. You may be able to reset the codes and disabled components by opening and closing the front cover while that screen is displayed.
tashima
05-06-2007, 01:32 PM
look at the codes in the troubles menu by pressing stop 0 stop 1 and choosing the sub menu at your convenience, if you can see for example in the key wrench at the display an E00400 look in the menu what it menas
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.