View Full Version : Receiving error c2814 and c2454 on c6500
copies
04-13-2010, 01:18 AM
I was receiving error c2814 error. So I swaped the black drum with the yellow drum and now I receiving error c2454. I swaped the drums back and still getting the error c2454. Any ideas?
anothertech
04-13-2010, 02:52 AM
Sounds like a bad black toner density sensor in the black dev unit.
copies
04-13-2010, 03:35 AM
Thank you for your help.I will replace the black dev.
Did you run a Auto Gamma Adjustment? Values on the drum swaps won't match internal values. Make sure you blow clean the drum potential sensor behind the drums when you replace or remove.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.