PDA

View Full Version : Bizhub 500 w/ FS510 Finisher; false 10 jams in finisher?


Custom Search


xeroid
04-13-2010, 08:10 PM
I removed the left end slider cover and inspected sensors. Lots of widgets. manually worked them all. After reassembly it worked until I tested stapled sets and went back to unclearable 10 missfeeds. Any ideas or help with a SM would be greatly appreciated.

MR CLEAN OC
04-14-2010, 06:52 AM
there are two one way needle bearing gears in the gear cluster just before the exit front side clean them. also hole punch clutch clean or replace

xeroid
04-19-2010, 07:37 PM
Thanks Mr Clean, They looked ok but I took apart cleaned reassembled and can't get to act up again.

Custom Search