View Full Version : c452,552, 652 belt and fuser reset
masterteknicion
04-14-2010, 04:58 AM
Does anyone know if these models have the fuse you can replace on the fuser and the belt to reset the electronic counters.
If so where would I find them.
Thanks for your help.
MR CLEAN OC
04-14-2010, 06:55 AM
Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.
tech51
04-14-2010, 06:55 PM
Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.
Just make sure you have the front door open when you re-set the counters. Doesnt re-set if door is shut.
masterteknicion
04-15-2010, 01:37 AM
Thanks for the replies, got it taken care of.
Printer People
05-22-2017, 01:16 PM
Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.
Just had the unit apart as i was resetting a C451 at the same time. Put it back in and now trolling through the service mode.....for the life of me i cannot see how I reset the count, I can see the fuser count but can not highlight it to reset it. Am i missing something or in the wrong place.
Synthohol
05-22-2017, 09:54 PM
see any box on top in life counter that says new release? if not its too old. you will need a .063A (1/16A fuse)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.