C451_550_650 Range

[JSC]

Has anybody had any of these machines 'dump' dev & toner on the black IU's. Ive had about 4 do it now all on diffrent firmware, ( have updated since) and on all but one of them the iu's had done less than half life.

Ideas anyone!!

[mo0651]

Use the search function. There has been a lot of discussion about those.

[emujo]

KM has come out with a mod for these units, it's a bracket that holds the K I/U up against the frame. If you need the bulliten, PM me. Emujo

[JSC]

Use the search function. There has been a lot of discussion about those.

Thanks mo0651 I should have done that before posting...School boy error on my part :)


KM has come out with a mod for these units, it's a bracket that holds the K I/U up against the frame. If you need the bulliten, PM me. Emujo

I Have checked CSES on the Uk site and found no mention of the mod, but it sounds like thats what i need i'll give tech support a ring on Tuesday. Thanks Emujo

[jackson]

if you fit the mod bracket, customer is unable to replace Iu themselves, just add a thicker pad to the blue lever that locks in the IU,achieves the same effect:cool: