PDA

View Full Version : Konica 7155 ADU showing false jam


Custom Search


rav555
05-07-2010, 03:16 AM
Hi, I need help on a 7155 showing a jam in the document feeder; I believe it's #14 that was on the display. New Customer, and I did not have the service mode procedure with me; I will be returning to the Customer.
There are no paper sheets or fragments in PU area or registration; interlocks are are all actuating for main body and ADU sensors actuators are free. I need to know from the konica devotees as to which specific sensor is likely to go bad or if there are any updates on this unit that i might need to be aware of?

Custom Search