PDA

View Full Version : Develop INEO+650 bad prints

Custom Search


frank.givskud
05-07-2010, 03:25 PM
Hello out there...

I have a Develop INEO+650 with Fiery. When I print there is a lot of noise on the document. I've have also tried to disconnect the Fiery, but the result is the same. See attached PDF file to see the problem. There is not a problem with copying!
sbillis
05-28-2010, 04:55 PM
Hello out there...

I have a Develop INEO+650 with Fiery. When I print there is a lot of noise on the document. I've have also tried to disconnect the Fiery, but the result is the same. See attached PDF file to see the problem. There is not a problem with copying!

what do you mean when you say that tried to disconnect Fiery but the same?
How you can print without RIP?

Try to reinstall Fiery system?
Problem appears in all printouts or on specific file?
Check cables?
Power source?

check your problem also in Konica Minolta
Konica Minolta (http://www.copytechnet.com/forums/konica-minolta/)

Custom Search