PDA

View Full Version : C- D203 Bizhub600


Custom Search


mirava
05-08-2010, 07:12 PM
Hello
I identified the problem as being generated by the NVRAM, after I replaced it with another NVRAM. The meter now displays with the old NVRAM 9999999999999.
Can someone help me with a CF card for parameter copy, or files contained therein?
Thanks in advance

emujo
05-10-2010, 01:09 PM
If you are sure it's a bad RAM, you must get the new NVRAM from KM. You can swap them around for testing, but a new one will be clean. There is a method to wipe the CF card clean and put the base firmware back on the card or use a new CF card. Emujo

mirava
05-11-2010, 07:32 AM
I checked the copier with a new NVRAM. Everything is good ok.CF card, as well as the firmware.What Im looking for is a particular CF (tool), or files cotained.This software is used for copy parameter memory,rewriting data that an NVRAM target

Custom Search