PDA

View Full Version : Bizhub 350 Error message displayed


Custom Search


aleksander
05-17-2010, 09:01 AM
Hi all, have you ever have any experience in bizhub 350 error message? error displayed on LCD control panel. I tried to rewriting the firmware, and the bizhub 350 run well. But the day after, error occurs again. Anyone have any experience? What's the real problem?
Thank you for any solutions.

Cantechman
05-17-2010, 11:02 AM
What is the error displayed?

aleksander
05-18-2010, 04:04 AM
Just "Error" on touch panel. Nothing else.

rferdi91
03-18-2014, 04:04 AM
Just "Error" on touch panel. Nothing else.

try to change the MEMS Card on the mfbs board

JR2ALTA
03-18-2014, 04:44 AM
it doesn't just say "error"

Hansoon
03-18-2014, 05:45 AM
it doesn't just say "error"

Exactly, furthermore would it be interesting to know if this is the B&W BH-350 or the color BH-C-350 since they are often mixed up.

Hans

fixthecopier
03-18-2014, 11:57 AM
I think I had one do that. Thought I had a laser issue. Was writing blocks of solid black and thick lines. Changing laser did not fix it. I then pulled and reseated the MFB. Booted machine and the control panel went nuts. Had lines though it, like a damaged screen, and displayed "ERROR". I replaced the MFB to fix it. It was a BZ250.

When you make the copier you think you know inside and out, say things you have never seen it say before, that is an "OH FUCK" moment.

Custom Search