View Full Version : Bizhub 420/500
Jonzeboy
05-25-2010, 02:33 PM
Did anyone have problem with the trouble code cd282 on a Bizhub 420/500?
mauro
05-25-2010, 03:01 PM
cd 282
Communication abnormality between the overall control board (OACB) and the scanner drive board (SDB). When the power switch (SW2) turn on, there is no SDB response.
Check cable and connectors
Jonzeboy
05-25-2010, 07:43 PM
And then?
aleksander
05-26-2010, 09:38 AM
do trouble reset.
Check ICP15 (2.3A) on Image Board (50GA-9020). I had a similar case.
Jonzeboy
05-27-2010, 12:31 PM
Check ICP15 (2.3A) on Image Board (50GA-9020). I had a similar case.
With the same error code? They only talk about overall control board and the scanner drive board in the service manual.
Yes with exactly the same code.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.