PDA

View Full Version : Bizhub 420 random issue


Custom Search


joesf
06-09-2010, 04:09 PM
I have a 420 out in the field, been working on these things since they hit the market and have yet to see an issue like this. It every so often from front to rear (not lead to trail) will just create a pixled image of what the copy is suppose to be in an area of about a 1/2 inch wide from front to rear. Very inconsistant, anyone else seen this before? I am leaning towards a drum but hoping not.


thanks in advance

fixthecopier
06-10-2010, 12:11 AM
Have not seen it before. Is it a copy problem or a print problem? I Would think it would be more along the lines of firmwarre or a board.

joesf
06-10-2010, 05:25 AM
It has latest firmware. Has not had a history of board issues. Its on the write side. If you scan one orig and print many, every so often it will throw some strange copy q issues. Lines fron to rear, will throw dots or pixled image. Pretty strange.

Albonline
06-10-2010, 01:53 PM
ram

RRodgers
06-10-2010, 07:12 PM
ram

I'd say ram as well. Reseat it.

joesf
06-10-2010, 11:23 PM
I tried it this morning, ill keep you posted if it resolved the issue. Thanks for responding everyone.

Custom Search