PDA

View Full Version : Jamming BZ421 LCC jams J13-09


Custom Search


tech51
06-11-2010, 05:43 PM
Seem to be getting this jam code a lot on this product. Not reaaly causing trouble yet but does any one have any ideas what causes it . It seems to come and go in phases. Any ideas would be appreciated...

Downunder
06-20-2010, 10:24 AM
On the LCC there is a forwarding roller just before the paper exits the LCC and goes into the copier. There is a oneway needle bearing on the shaft that would need a good clean

Custom Search