PDA

View Full Version : konica minolta pro c500 security lines on color copy (black monocrom copy is ok


Custom Search


costel fasola
06-11-2010, 07:10 PM
We park a Konica Minolta bizhub PRO C500 equipment that at some point all had to reset (to reset the memory and Board) as it burned laser engine gave me no engine code. I changed the engine angled drive after installing laser black but my security streaks appeared and can not get rid of them. One copy is on magenta , one copy is on cyan.- descriptions security lines. in service mode the machine printing ok. in the working mode prin, copies in black (monocrom) copies is ok. color copies or color printig is on lines (security lines). please help:(

costel fasola
06-11-2010, 07:58 PM
thise is the discution in the romanian forum on this topic:
"print ok I made a break between two documents in time to hear a click incare like those that lifts off arifiiciile be (without any odor or smoke). next page that gave it to print out an A4 sheet is white feet with a belt neagru 5 cm horizontally around the middle of the page. I gave resset General (main power off) and now I write or woming up times please wait ajusting original job (sounds like it stops spinning). not go further. Does not give code. : What could be?
p.s. mention that I and unwrapped and not found anything wrong.



«Last Updated: June 10, 2010, 09:42:06 by costel beans» Report this text to a moderator 92.82.245.219 (?)

________________________________________
You can .... more he tries ...!!!

Snowdrop Gherghe
Full Member


Karma: +5 / -1
[Applaud] [Smit]
Posts: 165


Answer: Koni Minolta bizhub PRO C500
«Reply # 1: June 2, 2010, 08:18:21» Quote Modify Remove sectioned topic

________________________________________
Good evening, Costel
... First I apologize for that I give the opinion on that click and fâsâitură, maybe ever cracked an electrolytic capacitor. Again sorry for the uninitiated that the answer I gave. Thanks for your patience.



Report this text to a moderator 89.122.195.38 (?)

________________________________________SĂNĂTATE
Tel.0748566158

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 2: June 2, 2010, 08:26:41» Quote Modify Remove sectioned topic

________________________________________
Quote from: Gherghe Snowdrop of June 2, 2010, 08:18:21
Good evening, Costel
... First I apologize for that I give the opinion on that click and fâsâitură, maybe ever cracked an electrolytic capacitor. Again sorry for the uninitiated that the answer I gave. Thanks for your patience.

all the Condesa and I thought I .... I posted in this form so you can imagine the situation better .... the question is which of them might be ,.... where
on prcb ok I see it ...



Report this text to a moderator 92.82.245.219 (?)

________________________________________
You can read more .... he tries ...!!!

seico
Hero Member


Karma: +15 / -0
[Applaud] [Smit]
Posts: 688


Answer: Koni Minolta bizhub PRO C500
«Reply # 3: June 2, 2010, 08:40:10» Quote Modify Remove sectioned topic

________________________________________
I do not know if it's electrolytic capacitor, but if she is safe and smells and sees himself

stiroflex or ceramic may be one or several that can damage insulation and various command elements or transformers

Power boards should be checked since the main source

Good luck and I hope that you reserve the equipment I need in this time of the end of the school year ..



Report this text to a moderator 188.27.129.163 (?)



costel beans
Global Moderator
Hero Member


Karma: 8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 4: June 2, 2010, 08:42:53» Quote Modify Remove sectioned topic

________________________________________
Quote from: seico of June 2, 2010, 08:40:10
not know if it would be electrolytic capacitor, but if safe and smells and sees him

stiroflex or ceramic may be one or several that can damage insulation and various command elements or transformers

Power boards should be checked since the main source

Good luck and I hope that you reserve the equipment I need in this time of the end of the school year ..
here you said it well seico ... the only color we had him here ..




Report this text to a moderator 92.82.245.219 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 5: June 2, 2010, 10:51:49» Quote Modify Remove sectioned topic

________________________________________
eventually give code ... 41-05
When the polygon motor / K
(M6) is started or the speed is
switched, M6 lock signal is note
Within the specified detected
time.
Estimated abnormal shares: Printer Control Board (PRCB)
Polygon engine / K (M6). in other words failed laser

find somewhere laser pro C500 bk?
is an opportunity to get it fixed p `it go?


resset that after a total of 7085 manual (an unorthodox recognize as) a review is someone?



"Last modified: June 2, 2010, 11:00:53 by costel beans» Report this text to a moderator 92.82.245.219 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 6: June 2, 2010, 11:44:02» Quote Modify Remove sectioned topic

________________________________________
situation is clear to me: I have polygonal engine PTR pro C500 Black Laser engine is the mailing list
65 AA 6602 M6 driver manually



Report this text to a moderator 92.82.245.219 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 7: June 3, 2010, 01:02:31» Quote Modify Remove sectioned topic

________________________________________
There polygonal engine changed but this shit streaks on print or color copy. (When the blue when red) print or copy on monochrome (black and white) out perfect.din service menu tests are well off their colors


________________________________________

Untitled.jpg (32.77 KB, 640x447 - viewed 38 times.)

«Last Updated: June 5, 2010, 07:59:18 by costel beans» Report this text to a moderator 92.80.183.228 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 8: June 5, 2010, 08:04:29» Quote Modify Remove sectioned topic

________________________________________
attach and testing of the service he
and some idea?


________________________________________

Untitled.jpg (15.13 KB, 640x452 - viewed 28 times.)

Report this text to a moderator 92.80.163.69 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Overall Chair
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 9: June 5, 2010, 01:11:14» Quote Modify Remove sectioned topic

________________________________________
a manual "all solutions" model that ?!?!?!!? PTR

here I found something ...
http://www.copytechnet.com/forums/konica-minolta/14291-help-konica-minolta-8050-c500-problem.html
in other words PTR nwram firmware or has someone written a nwram?



«Last Updated: June 5, 2010, 01:39:03 by costel beans» Report this text to a moderator 92.80.163.69 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 10: June 5, 2010, 09:29:14» Quote Modify Remove sectioned topic

________________________________________
Must redo the installation of the appliance, such as new, just like in the manual, then it will go.
I for C500 All existing manuals and firmware to plus installation manual, but are in an archive of 200 mega and are mixed but you can handle. If you tell me where to put them uploadu not last two days, to take them there, I give.



Report this text to a moderator 89.123.229.224 (?)



mihaisun
Hero Member


Karma: +4 / -3
[Applaud] [Smit]
Posts: 536


Responses: Koni Minolta bizhub PRO C500
«Reply # 11: June 6, 2010, 7:50:17» Quote Modify Remove sectioned topic

________________________________________
Transfer de fisiere foarte mari (pana la 1GB). Transfer.ro (http://www.transfer.ro)
attach in 10 min to 1 GB



Report this text to a moderator 89.44.239.243 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

costel fasola
06-11-2010, 07:58 PM
Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 12: June 6, 2010, 10:45:03» Quote Modify Remove sectioned topic

________________________________________
Quote from: mihaisun of June 6, 2010, 07:50:17
Transfer de fisiere foarte mari (pana la 1GB). Transfer.ro (http://www.transfer.ro)
attach in 10 min to 1 GB
As Michael says.
Thank you. can manage to put it today ... are also short of time.



Report this text to a moderator 92.80.190.152 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 13: June 6, 2010, 09:57:19» Quote Modify Remove sectioned topic

________________________________________
Happy downloading and I hope you are doing as little mixed. Good luck.

http://dl.transfer.ro/C500-transfer_RO-06jun-9e7803.rar



Report this text to a moderator 89.123.229.224 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 14: June 7, 2010, 12:39:02» Quote Modify Remove sectioned topic

________________________________________
I installed your firmware problem remains. Most of the Konica Minolta says this is prtectie if you jump a step of installation. A more detailed installation manual?



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 15: June 7, 2010, 02:51:37» Quote Modify Remove sectioned topic

________________________________________
I acknowledge that if protection is not the installation step. Detailed installation manual is not. Follow those steps exactly and it will go.



Report this text to a moderator 92.83.212.129 (?)



costel beans
Global Moderators
Hero Member


Karma: 8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 16: June 7, 2010, 04:24:59» Quote Modify Remove sectioned topic

________________________________________
Quote from: kmro of June 7, 2010, 02:51:37
I acknowledge that if protection is not the installation step. Detailed installation manual is not. Follow those steps exactly and it will go.
Well what are the exact steps that as the service manual does not explain too much



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Messages: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 17: June 7, 2010, 05:50:22» Quote Modify Remove sectioned topic

________________________________________
Respectively on page 13 to the end.

With this start.

Step Operation
1. Turn ON the main power switch.
2. Turn ON power while pressing the below [3]
and [6] on the number keypads to start [36
mode menu].
3. [36 Mode Menu Screen]
Press [1] Adjustment Process "key.
4. [Process Adjustment Menu Screen]
Press [2] Download peculiarity adjustment function "key.
5. [Download Peculiarity Adjustment Menu Screen]
Press [5] Automatic charge developers' key.
6. Check if the screen Shows [Y] the If the yellow
developer is ready, press the [START] key ..............
..........
Try to read the manual first tail end, to know what the device when not doing this in order to follow the steps.



"Last modified: June 7, 2010, 05:54:02 by kmro» Report this text to a moderator 92.83.212.129 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 18: June 7, 2010, 10:27:23» Quote Modify Remove sectioned topic

________________________________________
Quote from: kmro of June 7, 2010, 05:50:22
Respectively on page 13 to the end.

With this start.

Step Operation
1. Turn ON the main power switch.
2. Turn ON power while pressing the below [3]
and [6] on the numerical keypads.The home to [36
mode menu].
3. [36 Mode Menu Screen]
Press [1] Adjustment Process "key.
4. [Process Adjustment Menu Screen]
Press [2] Download peculiarity adjustment function "key.
5. [Download Peculiarity Adjustment Menu Screen]
Press [5] Automatic charge developers' Key.
6. Check if the screen Shows [Y] the If the yellow
developer is ready, press the [START] key ..............
..........
Try to read the manual first tail end, to know what the device when not doing this in order to follow the steps.
General and reset, firmware installed (and) installation from start to finish and ...
still nothing ...
or monochrome print issue remains - is perfect, a service - the perfect all tests. print or striped color copy exactly as above



«Last Updated: June 7, 2010, 11:23:48 by costel beans» Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 19: June 7, 2010, 11:24:56» Quote Modify Remove sectioned topic

________________________________________astept suggestions yet



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 20: June 8, 2010, 09:10:32» Quote Modify Remove sectioned topic

________________________________________
Moreover not really what to say. If you did everything by the book would need to go, that if something is not defective, PCBs, NVRAM, etc..



Report this text to a moderator 92.83.212.129 (?)



seico
Hero Member


Karma: +15 / -0
[Applaud] [Smit]
Posts: 688


Answer: Koni Minolta bizhub PRO C500
«Reply # 21: June 8, 2010, 11:15:07» Quote Modify Remove sectioned topic

________________________________________
it was a click there may be a thing, check card which is connected laser



Report this text to a moderator 188.27.129.163 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 22: June 8, 2010, 01:20:18» Quote Modify Remove sectioned topic

________________________________________
Quote from: seico of June 8, 2010, 11:15:07
it was a click there may be a thing, check card which is connected laser
black and white out perfectly (the laser was not black), not give any code ...



Report this text to a moderator 92.85.158.73 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Overall Chair
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 23: June 9, 2010, 09:46:05» Quote Modify Remove sectioned topic

________________________________________problema remains ....



Report this text to a moderator 92.80.130.199 (?)

________________________________________
You can read more .... tries take ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Konica Minolta bizhub PRO C500
«Reply # 24: June 10, 2010, 09:21:14» Quote Modify Remove sectioned topic

________________________________________
in other words, those lines are called "security lines"

"How to temporarily install the new or used Printer CB, CB Overall, Operation or the Board in 8050 for testing purposes Mode Without Using Board Change
(Binary serialization).
Solution
Refer to Bulletin 4982 for more details.To Number thePDF view Adobe Reader ® must be installed. Adobe Reader ® Can be Downloaded for free from the
Adobe ® web site at: Adobe - Adobe Reader download - All versions (http://www.adobe.com/products/acrobat/readstep2.html).
Notes: This mode is for diagnostic testing purposes only. Will this allow both black and white / color copies and prints, the leg color copies / prints Will have
Security lines on Them. "-what I found ...

Bulletin Number 4982 of Konica Minolta has anyone?

Bulletin Number 4982"

please help

costel fasola
06-11-2010, 08:00 PM
Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 12: June 6, 2010, 10:45:03» Quote Modify Remove sectioned topic

________________________________________
Quote from: mihaisun of June 6, 2010, 07:50:17
Transfer.ro - transfer profesional de fisiere foarte mari (chiar si de 1GB #s4) (http://www.transfer.ro)
attach in 10 min to 1 GB
As Michael says.
Thank you. can manage to put it today ... are also short of time.



Report this text to a moderator 92.80.190.152 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 13: June 6, 2010, 09:57:19» Quote Modify Remove sectioned topic

________________________________________
Happy downloading and I hope you are doing as little mixed. Good luck.

http://dl.transfer.ro/C500-transfer_RO-06jun-9e7803.rar



Report this text to a moderator 89.123.229.224 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 14: June 7, 2010, 12:39:02» Quote Modify Remove sectioned topic

________________________________________
I installed your firmware problem remains. Most of the Konica Minolta says this is prtectie if you jump a step of installation. A more detailed installation manual?



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 15: June 7, 2010, 02:51:37» Quote Modify Remove sectioned topic

________________________________________
I acknowledge that if protection is not the installation step. Detailed installation manual is not. Follow those steps exactly and it will go.



Report this text to a moderator 92.83.212.129 (?)



costel beans
Global Moderators
Hero Member


Karma: 8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 16: June 7, 2010, 04:24:59» Quote Modify Remove sectioned topic

________________________________________
Quote from: kmro of June 7, 2010, 02:51:37
I acknowledge that if protection is not the installation step. Detailed installation manual is not. Follow those steps exactly and it will go.
Well what are the exact steps that as the service manual does not explain too much



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Messages: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 17: June 7, 2010, 05:50:22» Quote Modify Remove sectioned topic

________________________________________
Respectively on page 13 to the end.

With this start.

Step Operation
1. Turn ON the main power switch.
2. Turn ON power while pressing the below [3]
and [6] on the number keypads to start [36
mode menu].
3. [36 Mode Menu Screen]
Press [1] Adjustment Process "key.
4. [Process Adjustment Menu Screen]
Press [2] Download peculiarity adjustment function "key.
5. [Download Peculiarity Adjustment Menu Screen]
Press [5] Automatic charge developers' key.
6. Check if the screen Shows [Y] the If the yellow
developer is ready, press the [START] key ..............
..........
Try to read the manual first tail end, to know what the device when not doing this in order to follow the steps.



"Last modified: June 7, 2010, 05:54:02 by kmro» Report this text to a moderator 92.83.212.129 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 18: June 7, 2010, 10:27:23» Quote Modify Remove sectioned topic

________________________________________
Quote from: kmro of June 7, 2010, 05:50:22
Respectively on page 13 to the end.

With this start.

Step Operation
1. Turn ON the main power switch.
2. Turn ON power while pressing the below [3]
and [6] on the numerical keypads.The home to [36
mode menu].
3. [36 Mode Menu Screen]
Press [1] Adjustment Process "key.
4. [Process Adjustment Menu Screen]
Press [2] Download peculiarity adjustment function "key.
5. [Download Peculiarity Adjustment Menu Screen]
Press [5] Automatic charge developers' Key.
6. Check if the screen Shows [Y] the If the yellow
developer is ready, press the [START] key ..............
..........
Try to read the manual first tail end, to know what the device when not doing this in order to follow the steps.
General and reset, firmware installed (and) installation from start to finish and ...
still nothing ...
or monochrome print issue remains - is perfect, a service - the perfect all tests. print or striped color copy exactly as above



«Last Updated: June 7, 2010, 11:23:48 by costel beans» Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 19: June 7, 2010, 11:24:56» Quote Modify Remove sectioned topic

________________________________________astept suggestions yet



Report this text to a moderator 92.82.251.10 (?)

________________________________________
You can read more .... he tries ...!!!

kmro
Newbie


Karma: +3 / -0
[Applaud] [Smit]
Posts: 39


Answer: Koni Minolta bizhub PRO C500
«Reply # 20: June 8, 2010, 09:10:32» Quote Modify Remove sectioned topic

________________________________________
Moreover not really what to say. If you did everything by the book would need to go, that if something is not defective, PCBs, NVRAM, etc..



Report this text to a moderator 92.83.212.129 (?)



seico
Hero Member


Karma: +15 / -0
[Applaud] [Smit]
Posts: 688


Answer: Koni Minolta bizhub PRO C500
«Reply # 21: June 8, 2010, 11:15:07» Quote Modify Remove sectioned topic

________________________________________
it was a click there may be a thing, check card which is connected laser



Report this text to a moderator 188.27.129.163 (?)



costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 22: June 8, 2010, 01:20:18» Quote Modify Remove sectioned topic

________________________________________
Quote from: seico of June 8, 2010, 11:15:07
it was a click there may be a thing, check card which is connected laser
black and white out perfectly (the laser was not black), not give any code ...



Report this text to a moderator 92.85.158.73 (?)

________________________________________
You can read more .... he tries ...!!!

costel beans
Overall Chair
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Koni Minolta bizhub PRO C500
«Reply # 23: June 9, 2010, 09:46:05» Quote Modify Remove sectioned topic

________________________________________problema remains ....



Report this text to a moderator 92.80.130.199 (?)

________________________________________
You can read more .... tries take ...!!!

costel beans
Global Moderator
Hero Member


Karma: +8 / -8
Posts: 789

Beans Costel - 0721.765.266 / 0239.62.00.23


Answer: Konica Minolta bizhub PRO C500
«Reply # 24: June 10, 2010, 09:21:14» Quote Modify Remove sectioned topic

________________________________________
in other words, those lines are called "security lines"

"How to temporarily install the new or used Printer CB, CB Overall, Operation or the Board in 8050 for testing purposes Mode Without Using Board Change
(Binary serialization).
Solution
Refer to Bulletin 4982 for more details.To Number thePDF view Adobe Reader ® must be installed. Adobe Reader ® Can be Downloaded for free from the
Adobe ® web site at: Adobe - Adobe Reader download - All versions (http://www.adobe.com/products/acrobat/readstep2.html).
Notes: This mode is for diagnostic testing purposes only. Will this allow both black and white / color copies and prints, the leg color copies / prints Will have
Security lines on Them. "-what I found ...

Bulletin Number 4982 of Konica Minolta has anyone?

Bulletin Number 4982"

please help

costel fasola
06-11-2010, 08:07 PM
i did resset on the memory board right on the manulal of the konica 7085 "all solutions manual" but i thist is not dit right. sow 2 questions:

1: how resset memory board on konica minolta pro c500?
2. how get rid of security lines after resset memory board of the konica minolta pro c500?

please help

thank you in advance

costel fasola
06-12-2010, 07:04 PM
problem remain....sow please annyone help-me.
1: how resset memory board on konica minolta pro c500?
2. how get rid of security lines after resset memory board of the konica minolta pro c500?

please help

thank you in advance

costel fasola
06-27-2010, 07:36 PM
solution for this problem:
replace controlller all 4 boards with prcb board form ATENTIONS ! same machines and rewrite firmware an is working.
problem is nv-ram .nv ram most rewrite in the konica-minolta factory .
topic is close

shahidmalik
10-21-2010, 01:28 PM
one copy on cyan and one copy on maganta i reset the copier factory defalt setting then problem plz help:(

Albonline
10-21-2010, 02:57 PM
run through the setup procedure,step by step.

shahidmalik
10-21-2010, 03:11 PM
run through the setup procedure,step by step.
which set up need to run step by step thanks .shahidmalik@hot mail.com

ineo+6501
10-22-2010, 08:59 AM
Download the installation instructions from CSES and follow it as if the machine was brand new and you have just taken it out of the box. Simply miss out the shipping bracket sections and skip to the engine setup.

costel fasola
10-27-2010, 07:48 PM
Download the installation instructions from CSES and follow it as if the machine was brand new and you have just taken it out of the box. Simply miss out the shipping bracket sections and skip to the engine setup.
i just did that....and is not working...is need reset nvram in kkonica minolta factory....
for resolve the problem i replace all 4 boards....from the same machines., initiate exacly new one and is working verry well

Stirton.M
10-28-2010, 02:07 AM
Yes, if there is a mismatch between the boards from factory setup, a lot of hoops need to be jumped to correct the problem. Just tossing in a new board and walking away is a sure way to encounter issues like this.

Custom Search