View Full Version : problem konika bh_163
abbas saeed
07-01-2010, 01:11 PM
How are you
I have a machine bh_163 and 211
Stopped working
Show me a message (M2)
I know that to change the cylinder
It then must work to facilitate
Machine to reset to work
My problem that I do not know how I work reset for this model
I ask you the way
TheOwl
07-01-2010, 01:30 PM
Manuals4U will be able to supply you with the service manuals which have all the information that you need to do a complete M2 service and reset the maintainence count.
JustManuals
07-01-2010, 09:15 PM
Thank you Owl.
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals (http://www.justmanuals.com)
Paul@justmanuals.com
abbas saeed
07-02-2010, 08:36 PM
Thank you
But I want just the way to the work of the reset
After you change and maintenance imaging unit
minimerlin
07-02-2010, 09:45 PM
Thank you
But I want just the way to the work of the reset
After you change and maintenance imaging unitHave you changed the developer/starter as well as the drum? You also need to clean out all the old waste toner from the recycler in the image unit. You really would be better with a manual so that all the settings are to hand
remati
07-02-2010, 10:13 PM
before reset you must change the starter ,the drum and the cleaning blade....
after that tou must run the ""ATDC adjust""............finaly reset counters ...
abbas saeed
07-03-2010, 12:03 PM
Thank you
Surely will change all the pieces required
Cleanup with all residues
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.