PDA

View Full Version : Bizhub 350 problem with Microsoft .NET Framework 3.5


Custom Search


aleksander
07-14-2010, 04:21 AM
Anyone have any experience with .NET Framework 3.5? I cannot viewing PageScope Web Connection bizhub 350 in .NET Framework 3.5 environment. But if I use Di3510 in .NET Framework 3.5 i can viewing Pagescope Light. So, no problem for Di3510. Problem happened for bizhub 350/250.
No problem if the bizhub 350/250 connected to .NET Framework 2.0 environment.

Any solution for this problem?
Thank you.

aleksander
07-15-2010, 05:35 AM
Anyone please help me for this problem. Very urgent. Thank you for any solution.

kingarthur
07-15-2010, 08:57 AM
I seem to remember we had this problem with a customer once, as far as i can remember, if you use Firefox instead of Internet Explorer, then you can access the m/c.

aleksander
07-15-2010, 09:24 AM
I seem to remember we had this problem with a customer once, as far as i can remember, if you use Firefox instead of Internet Explorer, then you can access the m/c.
How about Microsoft .NET Framework 3.5? PSWC cannot be viewed if using this version.
Thank you for replying kingarthur.

aesthetics1
07-15-2010, 09:55 PM
You need to use a different browser. Internet Explorer will kick HTTP Bad Request 400 errors. KMBS claims that setting up SSL on the machines will fix this (accessing them from https://ipaddress) but this has never been the case. Sometimes it's hit or miss. You can play around with Internet Explorer's security settings and sometimes get it to work briefly.

buster68
07-26-2010, 02:12 PM
Update the copier firmware to version 80. Print controller needs to be at version 5.

aleksander
07-27-2010, 03:19 AM
ok thank you all. I'll try it.

Custom Search