PDA

View Full Version : Help with Bizhub C351 error code C2257


Custom Search


videotech
07-15-2010, 12:08 AM
Our C351 is displaying the error code C-2257. An earlier post said that is "Cleaning brush motor failure to turn", but also said it can be resolved by cleaning the transfer belt. I cleaned off all the waste toner from the transfer belt, but I still get the error message. If it is the brush motor, where is that and what does it take to replace it? Any advice would be appreciated. And if someone has a link to the service manual, that would also be helpful. Thanks

Stirton.M
07-15-2010, 12:41 AM
make requests for the service manual in the service manual forum.

The manual will have the details on this code and the procedure for servicing.

However, I recommend you contact a qualified service tech if you have never repaired a copier before. DIY may end up with you owning a very large paper weight.

Custom Search