PDA

View Full Version : Errorcode C-EEE3 C452


Custom Search


Teqorious
07-19-2010, 03:31 PM
Hi,

Have anyone got the code "C-EEE3" on a Bizhub C452?

I have changed the Printer Controller Board, checked the cabels and upgraded the Firmware to the latest but still got the errorcode.

jotunn
07-20-2010, 12:08 AM
bizhub C652/C552/C452 Mass-Production Program 3rd version Maintenance release (Multi-Language / Ver.G00-B4)

The following issues are solved in this firmware:
23) When using MFP from PageScope Authentication Manager, "C-EEE3" occurs and cannot reset the error.

So try to find and upload to your machine software version G00-B4.

Teqorious
07-21-2010, 12:44 PM
Thanks Jotunn,

I got the machine to run again.
What I did was: released the finisher and HDD, resetting the trouble code, upgraded the firmware to G00.B4 and put the finisher and HDD back and started the machine.

I heard that a bad card in the finisher also can generate this code.

Custom Search