PDA

View Full Version : pro 1051, anyone seen this before?


Custom Search


Herrmann
07-22-2010, 09:36 PM
Went to a 1051 this morning, and see, that the transfer belt is torn. Checked all in the area and i can not find any reason for this happening. Mashine has only 750k on it. Someone here who has seen this before and can give me a hint, why this could happen ?

54405441

texchar555
07-25-2010, 04:27 AM
herrmann, at 750k you will need a pm kit installed. as far as the ripped tr belt i would check to make sure the tr belt unit is not locking up.

Arcadian
07-15-2013, 07:16 AM
herrmann, at 750k you will need a pm kit installed. as far as the ripped tr belt i would check to make sure the tr belt unit is not locking up.

have to agree there make sure all rollers are of free movement.

Good luck

protech
02-25-2014, 11:44 PM
Check all the mylar inside the belt cleaning unit make sure not bent or deformed i have the same issue swap the transfer belt cleaning unit works fine no more ripped transfer belt.

Custom Search