Rato
07-26-2010, 04:35 PM
Hello everybody! At first - sorry for my bad english.
I have a big problem with BIZHUB 211. When I turn ON the machine, turn on the machine I hear the motor rotating but nothing on LCD. Scanner lamp doesn't lit, and so LED on lid. Fan on left side of the machine works all the time.
When I connect machine via USB, Windows says "Unknown USB device" or "Device malfunctioned", so I couldn't upgrade firmware.
Power supply seems OK. There is 3.3V, 5V and 24V. I doubt that the GDI board is faulty, however I haven't found on the internet where I could get a new one.
If anyone had a similar problem, I'd like to hear his experience. Thanks in advance.
I have a big problem with BIZHUB 211. When I turn ON the machine, turn on the machine I hear the motor rotating but nothing on LCD. Scanner lamp doesn't lit, and so LED on lid. Fan on left side of the machine works all the time.
When I connect machine via USB, Windows says "Unknown USB device" or "Device malfunctioned", so I couldn't upgrade firmware.
Power supply seems OK. There is 3.3V, 5V and 24V. I doubt that the GDI board is faulty, however I haven't found on the internet where I could get a new one.
If anyone had a similar problem, I'd like to hear his experience. Thanks in advance.