PDA

View Full Version : Dead Machine Konica Minolta BIZHUB 211 - dead


Custom Search


Rato
07-26-2010, 05:35 PM
Hello everybody! At first - sorry for my bad english.

I have a big problem with BIZHUB 211. When I turn ON the machine, turn on the machine I hear the motor rotating but nothing on LCD. Scanner lamp doesn't lit, and so LED on lid. Fan on left side of the machine works all the time.

When I connect machine via USB, Windows says "Unknown USB device" or "Device malfunctioned", so I couldn't upgrade firmware.

Power supply seems OK. There is 3.3V, 5V and 24V. I doubt that the GDI board is faulty, however I haven't found on the internet where I could get a new one.

If anyone had a similar problem, I'd like to hear his experience. Thanks in advance.

aleksander
07-27-2010, 04:30 AM
have you ever checked or replaced the MFP board and printer control board? Try it. Something wrong with them.

Rato
07-27-2010, 12:28 PM
Thanks.

Where could I get or buy them? I couldn't find it on Internet.

Rato
10-09-2010, 06:21 PM
bump

edit: If anyone has an electronic scheme of bizhub 163 or 211, I'd love to share it with me.

Thank you

Custom Search