PDA

View Full Version : Miscellaneous SD-508 on C652


Custom Search


lanierboy
07-30-2010, 12:19 PM
Hi,

I have a SD-508 on a C652 that has a skew in the fold, i have checked the manuals etc and can only find position adjustments for the fold and staples etc but no skew adjustment.

has anyone had to adjust this as its not obvious like the old fs-608 finishers.

thank you

tcs04
07-31-2010, 11:05 AM
without looking, may be in the installation manual?

lanierboy
08-11-2010, 10:15 AM
found out its the same as the old fs608 type finisher, but you have to make sure you retension the drive belt and move the sensor

Custom Search