View Full Version : konica1216
cliffhangers
08-04-2010, 07:52 AM
Hi.i have put so many wrong code on my konica1216 and it's now displaying p26.please how can i reinstall the system.help me.thanks.
montana
08-04-2010, 08:43 AM
DESCRIPTION: P26 displayed after resetting the PM counter. SOLUTION ID: 51,887
SOLUTION: CAUSE: The L-detect was not performed before resetting the PM counter.
SOLUTION: Perform the L-detect adjustment (47 mode, output code 51, press start/print). The copier
should cycle for approximately 2 minutes. At the end of the adjustment, 51 should be displayed. If 26 is
displayed, perform the L-detect adjustment again.
Hi cliffhangers,
Tell us more what you had noticed or done before the P26 Error Code. The more detail, the best.
We need your information to break the code.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.