View Full Version : bizhub 920
gamalmehdar
08-05-2010, 01:00 PM
i have bizhub 920 and its show me the error C41-01.
how can reset this error and reslove te problem
thanks
It relates to the scanner home sensor (PS1)
gamalmehdar
08-05-2010, 05:05 PM
but how can reset and resolve this problem
If it happens at start up it could be the DCPS/2 or the scanner driver board
RRodgers
08-05-2010, 07:24 PM
If it happens at start up it could be the DCPS/2 or the scanner driver board
Unplug it, take off the glass and move the scanner over about 6~8 inches and then put the glass back on and fire it up. If the scanner doesn't move back to it's home position ya got a problem witht the svanner drive.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.