View Full Version : Dead Machine service password c350
jackson007
08-09-2010, 05:55 AM
sir,
one of my costomer had called unothorised engineer for service of c350.he dhanged password of Admn & c.e.password .I could not abel to open it help me please .
jackson007
08-09-2010, 06:00 AM
sorry it is c 353 model
Stirton.M
08-09-2010, 07:23 AM
In tech rep mode, STOP-ZERO-CLEAR
jackson007
08-09-2010, 09:48 AM
sir ,
I could not abel to open admn & service both sir
Stirton.M
08-09-2010, 09:49 AM
Good grief.
If you are not a technician, find one.
jackson007
08-09-2010, 12:05 PM
how can I open with out password sir
emujo
08-09-2010, 01:03 PM
Basically he's trying to politley say he is not giving you the admin password...if you can get into service mode then you should be able to reset the password from there. If you are not a KM tech then call a "authorized" dealer and have them reset it for you. Admin passwords should not be posted. Emujo
jackson007
08-09-2010, 01:34 PM
I am a costomer engg.but didt fasedany time this type of problem.actually one of our competater locked like this .now i want to gradiation mode.that s why i want to open service mode.after entering service procedure its asking ce password.default password is not opening.so plz tell me any other procedure sir.sorry for disturbing u...........
emujo
08-09-2010, 02:54 PM
What is the password you are using that is not working?
jackson007
08-10-2010, 05:34 AM
What is the password you are using that is not working?
12345678 for admn
92729272 for c e
jackson007
08-12-2010, 10:25 AM
12345678 for admn
92729272 for c e
its c353
TheOwl
08-13-2010, 03:44 AM
Please don't double up your threads either, as I have replied to your other post with the exact same problem.
jackson007
08-19-2010, 07:52 AM
no body knows oh bad
yousaf
03-02-2011, 06:53 PM
how to go in tech rep mode plz tell me
thanksssssssssssssssssssssssssssssss
karim-tech
03-06-2011, 08:19 PM
the ce password is registred in the NVRAM only Konica Minolta can change it for but you can tray an other solution:
what you need is to perform the image quality so you can get an other NVRAM from another machine but the same model an do what u want
good chance
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.