PDA

View Full Version : Error Code error c1183


Custom Search


stewart
08-19-2010, 12:27 PM
hi everyone need some info on this error what are the posable fixes besides the motor
error c-1183
thanks

ineo+6501
08-19-2010, 12:42 PM
And the machine model is?

Stirton.M
08-19-2010, 02:15 PM
Elevator drive malfunction.

Usually the motor is not the fault. Check for unbalanced tray unit, ie-front side is slightly higher than back side or vice versa. It may need to be adjusted.

Check the sensor flags.

And also, adjust the two outside castors to elevate the far left side of the finisher (relative to the machine) to make the finisher unit tilt in towards the machine.

Custom Search