i have a konica 350 that had a 2 inch shaded area at bottom. changed drum, blade and developer and copies were perfect. 2 days later same problem. 2 inches at bottom that is shaded dark. did use drum from di 350 but have done so before with no problems. not real familiar with this machine and would apreciate any help
-
-
First, you'd probably get more replies to your post if you posted inside the Konica Minolta forum.
Second, an scanned example would help us understand better what you're getting.
Third, are the mylars at the edges of the magnetic roller in the developing unit in good condition?' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Comment