PDA

View Full Version : C6500 error code c-3906


Custom Search


theprinter
09-15-2010, 09:59 PM
Hi guys!

I am an operator and my machine recently brought up the error c-3906 during warmup, turned the machine on and it begins to warm up and then brings up the code. please help if you can.

thank you

jma676
09-15-2010, 11:03 PM
Konica Minolta - Bizhub Pro C6500 - Error SC-3906

Cause: Fusin low temperature hardware detection abnormality. Temperature Sensor/4 (TEMS/4) detected abnormality signal continuously for the specified time.

If you has operator, contact a KM Technician, to solve this.

Then need reset DipSW 3-1.

theprinter
09-17-2010, 08:43 AM
/thanks for that, do I need to set dipsw 3-1 to on or off

Stirton.M
09-17-2010, 01:51 PM
Turn it off.

jma676
09-19-2010, 07:40 AM
-----------------------------------------0=Off---------------------------------------------------

Custom Search