Bizhub 361 NVRAM reset

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • iamthecage
    Technician
    • Sep 2010
    • 13
    #1

    Bizhub 361 NVRAM reset

    What is the procedure to do an NVRAM reset on a 361?

    I know the older procedure starts with DipSW 31-0, but it seems to be different on this model.
    Tags: 361, bizhub, dipsw, model, nvram, older, procedure, release, reset, starts
    • Konica_jr
      Technician
      • Aug 2010
      • 25
      #2
      Hi,
      why do you want to do this ?
      " French do it better " ^^

        Comment

        • RRodgers
          Service Manager

          1,000+ Posts
          • Jun 2009
          • 1947
          #3
          Originally posted by iamthecage
          What is the procedure to do an NVRAM reset on a 361?

          I know the older procedure starts with DipSW 31-0, but it seems to be different on this model.
          You'll need the file to write to a cf card. Then boot the cf card and run it. Honestly, don't do it. You probably don't have the set up instructions to reinstall the machine and you'll end up with a brick.
          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • marco1508
              Technician
              • Sep 2010
              • 32
              #4
              this procedure no apply for this model, you need rewrite the data in the flash memory, I have the service manual and the software, ensamblerman@gmail.com

                Comment

                • TheOwl
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Nov 2008
                  • 1732
                  #5
                  Again, why do you need to reset the NVRAM?

                  There are many good reasons why you wouldn't want to reset the NVRAM. The biggest one is that you will lose your counters and meter readings. What good is service history on a machine if you don't have those? As it stands, Konica Minolta are extremely strict on whoand why they release new NVRAM chips to as resetting the meter count on a copier is illegal in alot of countries.
                  Please don't ask me for firmware or service manuals as refusal often offends.

                    Comment

                    • madboy
                      Junior Member
                      • Mar 2009
                      • 3
                      #6
                      Re: Bizhub 361 NVRAM reset

                      Hello,

                      I've seen forum copytech you know Reset the NVRAM on this machine, I get many errors concerning this and I would like to show me the steps to reset it to factory.

                      a greeting

                        Comment

                        Previous template Next
                        Working...