PDA

View Full Version : c252


Custom Search


NIKIL.KP
09-29-2010, 01:20 PM
Hi all
when the c252 machine is on,the display will give sand time and goes off completely.i rewrite the firmware of mfp,printer and scanner.download was completed and in mfp it showed download completed with checksum.i have interchanged the control panel but still problem exists.please advise

thankyou

RRodgers
09-29-2010, 04:20 PM
Sounds like a bad NVRAM. You'll have to open a ticket with KM and they'll send ya out one.

Stirton.M
09-29-2010, 11:11 PM
NVRAM recovery tool might help...kinda a last ditch effort before doing an exchange.

Custom Search