Imsdal
10-18-2010, 02:54 PM
Well, the problem with this machine was that the developer from the IU black was leaking.
So, I change the IU and itīs come the warning P14. Now I have download the firmware R6 into the machine and I did a skew adjust and graduation adjust and what happens is that i get incorrect color registration. I have even clean the sensor for the transfer belt but no use. After a day or so the problem disapear but it come back time to time, and now the problem wont get away. Do I need to do something else to this issue, and this is not the only machine I have 2 more with the same issue.
Can anybody help me with this problem.
Sincerely
David
So, I change the IU and itīs come the warning P14. Now I have download the firmware R6 into the machine and I did a skew adjust and graduation adjust and what happens is that i get incorrect color registration. I have even clean the sensor for the transfer belt but no use. After a day or so the problem disapear but it come back time to time, and now the problem wont get away. Do I need to do something else to this issue, and this is not the only machine I have 2 more with the same issue.
Can anybody help me with this problem.
Sincerely
David