PDA

View Full Version : Bizhubpro c5501


Custom Search


thuo
10-20-2010, 04:25 PM
hi
how can one resett error code sc4522 which pops up immediately after powering on
thanks

Luong Nam
10-20-2010, 04:54 PM
Bizhub Pro C5501 has not SC-4522 error code. I think that it's C-4522 error code.
C-4522:
Cause: Color registration base line correction/Rr aborted.
Resulting operation: Main body stops immediately and main relay (RY1) is turned OFF.
Estimated abnormal parts: Printer control board (PRCB) Color registration sensor/Rr (PS9)

Mr Spock
10-21-2010, 02:55 AM
clean the reg sensors. Then check each dev unit for a light patch and the transfer belt walking to one side or the other.

HORSE
10-21-2010, 10:11 AM
Clean the Rear color registration sensor and run Auto Color registration adjustment.

thuo
10-24-2010, 08:43 AM
clean the reg sensors. Then check each dev unit for a light patch and the transfer belt walking to one side or the other.
HI
Thanks for your suggestion.i found the retraction rollers inthe transfer belt unit were stack.

Custom Search