PDA

View Full Version : DF-605 problem on bizhub 350


Custom Search


aleksander
10-29-2010, 04:43 AM
Hi all,
I need your help for this crazy problem. I have bizhub 350 with optional DF-605 installed. This problem happened if I use the ADF for the scanner function (FTP, SMB, email), no problem for copier function. I attached the example file below. If I use the original glass, you can see the scanned file at the right one, and the other one is using ADF with auto-detect mode.
If I placed the document in portrait direction using ADF, I've got a full page scanned file (scanned file 2.jpeg). But, if I placed it in landscape direction on ADF, You could see it below (scanned file 1. jpeg).

6871 6872

I've already tried to change the PBA-CONT and DF-605 and MFBS and it doesn't work. Still same problem.
Anyone know the solution for this one? Please Help.
Thank you.

RRodgers
10-29-2010, 05:33 AM
Am I missing something?

aleksander
10-29-2010, 05:43 AM
what? you know the solution? t

RRodgers
10-29-2010, 05:53 AM
ohhh... I think I see the prob now. Hmmm... firmware is were I would start first, then check your line speed adjustments as well as zooming. Be sure it's at 100% or 1.0.

aleksander
10-29-2010, 07:20 AM
ohhh... I think I see the prob now. Hmmm... firmware is were I would start first, then check your line speed adjustments as well as zooming. Be sure it's at 100% or 1.0.
Same firmware with another bizhub 350. Could you tell me how to check the line speed adjustment? no zooming. Another solution?
thank you.

aleksander
11-01-2010, 02:33 AM
anyone have solution for this problem? Please help me.
Thank you.

albasoul06
11-01-2010, 03:06 AM
SOLUTION: Replace slit plate glass (# 4551 2031 01) and perform the DF height adjustment.

aleksander
11-01-2010, 04:41 AM
SOLUTION: Replace slit plate glass (# 4551 2031 01) and perform the DF height adjustment.
could you tell me how to perform DF height adjustment? thank you

albasoul06
11-01-2010, 11:36 AM
you don't know to adjust HINGES ?

aleksander
11-02-2010, 06:56 AM
only Hinges? still not working
I change the slit plate glasses and still the same problem.
Any other possibility? thank you for solution.

aleksander
11-03-2010, 04:12 AM
I tried it but still not work well. Any other solution? Please help. very urgent.

Hansoon
11-03-2010, 07:41 AM
I know its me but having read this post several times and just spending now 10 minutes to understand what the problem is, I don't get it.

Aleksander, what is the problem you have? Your description is confusing to me. If I print out the JPEG's and compare, I see a slight difference in width. Is that what bothers you?

BTW you could use a new testpattern. All those smudges are confusing too.

Hans

aleksander
11-03-2010, 09:57 AM
I know its me but having read this post several times and just spending now 10 minutes to understand what the problem is, I don't get it.

Aleksander, what is the problem you have? Your description is confusing to me. If I print out the JPEG's and compare, I see a slight difference in width. Is that what bothers you?

BTW you could use a new testpattern. All those smudges are confusing too.

Hans
You can see and compare the the 2 JPEGs file and watch the right side/edge. Not full image.
Sorry Hans. Thank you for responding. :)

Darren King
11-05-2010, 08:49 PM
Do a DF width adjustment. Hope this helps
Darren

aleksander
11-06-2010, 03:11 AM
I know the solution and it works well. Change the firmware to ver. 70

Custom Search