PDA

View Full Version : C452+OT-503 Output tray (volume paper limit)


Custom Search


IKy
10-29-2010, 08:17 PM
c452 with OT-503 doesn't say "The output tray has reached its
capacity.
Remove paper from the tray" and user has a mass and jams when prints high volume.
Should they add JS-504 Job Separator at least to avoid it?

Stirton.M
10-30-2010, 12:00 PM
No, the only real fix to this issue is to put a real finisher on the machine that can handle high volume job output, the FS-526 is specific to this. The OT and JS devices are simply cheap output devices that IMO are complete wastes of time to purchase, install and use. They might be fine on say a C203 (debatable), but not on a volume machine like the C452. The customer is better off not having the OT or JS at all, if a finisher is not in the budget, though truth be told, these machines should not be sold without a full sized finisher if the user intends to output large volume jobs without personally monitoring progress of said job.

Custom Search