Zoollanderhu
11-01-2010, 10:35 AM
Hi Guys!
I've got a problem with QMS m.c 2300 DL. It always has got a jam before the fuser/ fixing, at the transfer belt, it always encashes the paper in side like it has some problem with the transportation roller. :confused:
Eventhough I cleaned it as the service manual recommends, but it has this jam. Like there is something problem with the clutch or something ( main motor works perfectly) :confused:
Does anyone have any idea , why does it encash?
Thanks in advance for your ideas!
Best regards, Norbert :)
I've got a problem with QMS m.c 2300 DL. It always has got a jam before the fuser/ fixing, at the transfer belt, it always encashes the paper in side like it has some problem with the transportation roller. :confused:
Eventhough I cleaned it as the service manual recommends, but it has this jam. Like there is something problem with the clutch or something ( main motor works perfectly) :confused:
Does anyone have any idea , why does it encash?
Thanks in advance for your ideas!
Best regards, Norbert :)