CKiiza
11-06-2010, 02:37 PM
I changed drums, chargers, cleaning blade, toner filter and developer.
On starting the machine, to do the adjustments, after starting the TonerDensitySensor Init. it gave me error code C2451 I added toner to the yellow developing unit and that code was released. but it displayed another one there after C2424. Service manual says
"After the developing motor/K
(M23) is ON, or TCR sensor/K
(TCRS/K) initial adjustment
started, TCRS/K detected lower
than the specified value after the
specified time passed."
It however doesn't tell what action to do.
Tried to add toner manually, switched TCRS with cyan unit but still the code is displayed. any advice and tips pliz?
Thank you so much for the help.
On starting the machine, to do the adjustments, after starting the TonerDensitySensor Init. it gave me error code C2451 I added toner to the yellow developing unit and that code was released. but it displayed another one there after C2424. Service manual says
"After the developing motor/K
(M23) is ON, or TCR sensor/K
(TCRS/K) initial adjustment
started, TCRS/K detected lower
than the specified value after the
specified time passed."
It however doesn't tell what action to do.
Tried to add toner manually, switched TCRS with cyan unit but still the code is displayed. any advice and tips pliz?
Thank you so much for the help.