PDA

View Full Version : c452 brand new out a da box lines


Custom Search


digicor
11-07-2010, 04:19 PM
i have unboxed a brand new c452 and when i use the scanner, (not print) i have thin alternating red and blue lines spaced a half inch apart down the whole page?any ideas on how to solve this? i have to deliver it monday....please help!! i have ran calibration,no diff.
i have never ran into this problem before.

Mr Spock
11-07-2010, 04:46 PM
follow the set up instructions step by step. This happens when the steps are not done in the correct order. This includes serial number, date and time, etc.

SmellsHot
11-08-2010, 12:43 PM
For sure.....run the setup instructions!

CKiiza
11-08-2010, 12:53 PM
Follow the setup instruction manual and more specifically the calibration part.

emujo
11-08-2010, 02:07 PM
Ditto, we call these the "lines of shame"...lazy setup guys that think they don't need to look at the setup guides because they have done it so many times..Emujo

kingarthur
11-08-2010, 02:53 PM
Ditto, we call these the "lines of shame"...lazy setup guys that think they don't need to look at the setup guides because they have done it so many times..Emujo

I like it..

Mr Spock
11-08-2010, 11:35 PM
Ditto, we call these the "lines of shame"...lazy setup guys that think they don't need to look at the setup guides because they have done it so many times..Emujo


I thought those were the "Lines of Edwin"!!!

I just got one of these Friday.

digicor
11-09-2010, 10:59 PM
i have resolved the lines of shame, the boss had tossed the man...in his abyss of a desk, thANKS guys

Custom Search