PDA

View Full Version : konica1015


Custom Search


cliffhangers
11-10-2010, 08:38 AM
Hi,I on this konica1015 copier it cames on with no problem no error code,it show the green light that is ready to copy be when i try to copy the copy cames out blank,then i open the top glass and press copy check if the exposure lamp is shining and i discover that the lamp shine as i press copy bet stop shining befor it move to the other end to scan.i done know what is hapening.i need your help. thanks in advance.

mrwho
11-11-2010, 09:12 AM
Do your copies come out white or black?

Luther
11-12-2010, 03:57 AM
Its analog, if the lamp was out you would get black copies,if it was completely blank i would suspect a broken corona wire ( wont always get a code with a broken wire) or bad developer unit gears which were a big problem with that machine,,,should be simple to diagnose....good luck

crismoncy
11-12-2010, 04:46 AM
if blank copy check the corona charging unit.

Custom Search