PDA

View Full Version : Error Code bizhub 164 please wait


Custom Search


jackson007
11-11-2010, 09:03 AM
one of my costomer new machine biz hub 164 is showing " please wait" only .machine not getting ready .what it may be sir

mo0651
11-11-2010, 02:10 PM
is the machine cycling or running while saying please wait? Maybe trying to add toner. check the toner bottle.

1FRY1
11-11-2010, 11:45 PM
Had this on similar small machines turn it on and it says please wait because the scanner cannot calibrate. If the exposure lamp is on it is most probably the CCD unit if the Exposure lamp is not on then most prob the exposure lamp

There is a minolta bulliton about it

Hope that helps ;-)

rprem
11-15-2010, 05:11 AM
hi u r installing new machine this is the first machine u r installed have u removed all the tapes screw etc scanner lock

Custom Search